Question: What Are Scale Model Sizes?

How do you convert actual size to scale?

To scale an object to a smaller size, you simply divide each dimension by the required scale factor.

For example, if you would like to apply a scale factor of 1:6 and the length of the item is 60 cm, you simply divide 60 / 6 = 10 cm to get the new dimension..

What size is a 1/64 scale?

1:64 scale is a traditional scale for models and miniatures, in which one unit (such as an inch or a centimeter) on the model represents 64 units on the actual object. It is also known as “three-sixteenths scale”, since 3/16-inch represents a foot. A human is approximately 1 1⁄16 inches (27 mm) tall in 1:64 scale.

How do you use a 1 50 scale?

You could also say, 1 unit in the drawing is equal to 100 units in real life. So, if we were drawing a table that measured 100cm wide by 200cm long at a scale of 1:50, you would draw the table 2cm wide by 4cm long on your piece of paper. This is worked out by dividing the real life size (100cm) by 50 (1:50 scale).

What size is a 1/72 scale model?

1:72 scale is a scale used for scale models, most commonly model aircraft, corresponding to one sixth of an inch representing one foot (or 1 inch to 6 feet). In other words, 72 of a given model placed end to end would represent the length of the real thing.

What size is a 1 50 scale model?

Model scalesRatioMillimetres per foot1:506.096 mm1:486.350 mm1:456.773 mm1:43.57.02 mm95 more rows

What size is a 1/18 scale car?

Most models are approximately 11 inches (280 mm) long by 5 inches (130 mm) wide by 4 inches (100 mm) tall, depending on what vehicle is being represented. Such detail is common to 1:18 scales and larger.

What does a 1/18 scale mean?

1:18 scale is a traditional scale (ratio) for models and miniatures, in which 18 units (such as inches or centimeters) on the original is represented by one unit on the model. … Many 1:18 scale automobiles are over 11 inches long, while 1:18 aircraft may reach over 3 feet in length.

What is the scale factor for 1 32?

To obtain the scale factor of an Architectural drawing scale: Multiply the denominator of the desired scale by 12….Engineering and Architectural scale table.Architetural Scale1/32″ = 1′-0″3841/384xp1/16″ = 1′-0″1921/192xp3/32″ = 1′-0″1281/128xp1/8″ = 1′-0″961/96xp13 more rows•Feb 1, 2010

What size is 1 24 scale in inches?

1:24 means that a unit of measurement, such as one inch or one centimeter, on the model represents 24 units on the actual object. An example would be one inch of length on a model automobile would represent 24 inches on the real vehicle.

What size is a 1/32 scale model?

1:32 scale is a traditional scale for models and miniatures, in which one unit (such as an inch or a centimeter) on the model represents 32 units on the actual object. It is also known as “three-eighths scale”, since ​3⁄8 inch represents a foot.

What does a scale of 1 25 mean?

For example, your map has a scale of 1:25 000, which means that every 1cm on the map represents 25 000 of those same units of measurement on the ground (for example, 25 000cm = 250 metres).

What is a 1/16 scale?

“Scale” refers to the relative size of the replica toy to the actual vehicle, expressed as a fraction or a ratio. The large toy tractor is 1/16 the size of the actual tractor. Every inch on the replica equals 16 inches on the real tractor. … For example, a 1/16 scale toy could measure 8, 12, or 14 inches long.

What is the formula for scale factor?

In the equation y = Cx, C is the scale factor for x. C is also the coefficient of x, and may be called the constant of proportionality of y to x. For example, doubling distances corresponds to a scale factor of two for distance, while cutting a cake in half results in pieces with a scale factor for volume of one half.

How do you determine scale size?

Take the length of the Full Size Ship in Feet, multiply (x) by 12 to get the Length in Inches. Take that number and Divide it by the Length of your model (also in Inches), and you will have determined the Scale.

What does it mean for a model to be to scale?

A scale model is a representation or copy of an object that is larger or smaller than the actual size of the object being represented. Very often the scale model is smaller than the original and used as a guide to making the object in full size.

What is the difference between 1 24 and 1 25 scale?

Registered. For display purposes, 1/24th and 1/25th scale are close enough for horseshoes, as they say. The difference in size is about 4 percent. You won’t be able to swap engine or chassis parts between the two scales, though — one won’t fit with the other.

What size is 1 87 scale?

HO or H0 is a rail transport modelling scale using a 1:87 scale (3.5 mm to 1 foot). It is the most popular scale of model railway in the world. The rails are spaced 16.5 mm (0.650 in) apart for modelling 1,435 mm (4 ft 8 1⁄2 in) standard gauge tracks and trains in HO.

What is the biggest model scale?

From front to back, the scales are: 1/144, 1/72, 1/48, 1/32, and 1/24. The smallest (1/144 scale) would be a little more than 2½” long; the biggest (1/24 scale), slightly more than 16″.

How do model scales work?

Models come in a range of scales, the most common being 1:4, 1:8, 1:12, 1:16, 1:18, 1:24, 1:48, and 1:72. … When reading the scale then, the number on the left side of the colon (usually 1) represents the model, and the number on the right-hand side represents how many times larger the original object is by comparison.

What is the biggest scale model car?

How big is a 1 18 scale model car?The scale size 1:18 is one of the biggest size of scale model cars and is DNA Collectibles most popular scale. … Model cars in this scale are between 10 (250 mm) and 12 (300 mm) inches in length, and by definition, it is said that it is 18 times smaller than a car.More items…•

How big is a 1 700 scale model?

1:700 Scale, the collector’s scale, offers the modeler hundreds of different model ship kits to choose from. This smaller scale translates to 1 Foot equals 700 Feet. Based on the example above, a 700′ long ship would be a 12″ model.