Question: Can You Blacktop Your Own Driveway?

How much does a blacktop driveway cost?

Asphalt laying services cost $30/m2 on average.

Rates, however, vary from job to job.

You can expect the cost of asphalt per m2 to be anywhere from around $25/m2 to $40/m2.

There are many factors that determine where you will pay the lower or the higher cost of asphalt per square metre..

How long does a blacktop driveway last?

How long does each driveway surface last? Typically, concrete lasts up to 30 years, while asphalt lasts up to 20 years. However, installers say driveways may need to be replaced sooner or last longer depending on upkeep.

Why do concrete driveways crack?

The most common cause of cracks in driveways is improper installation, usually in the form of a poorly constructed base or subbase. … When this loose material gets moist, the freeze-thaw cycles cause the material to expand and contract, putting uneven pressure on the driveway and causing the concrete or asphalt to crack.

What is the best low maintenance driveway?

Low-Maintenance Driveway OptionsPaving Stones. Paving stones are known to last up to a full century if properly laid. … Concrete Grass Pavers. An interlocking concrete grass paver driveway made may be an option for your driveway. … Plastic Permeable Pavers.

Should I fix my driveway before selling?

If you are planning to sell your home in the near future, replace your driveway instead of making repairs. While you may not get a dollar-for-dollar return-on-investment, a new driveway will add more appeal to your home than a patched or cracked driveway, which could quickly scare off potential buyers.

How often should you repave a driveway?

roughly two to three yearsHow often should a driveway be sealcoated? When you consider that residential driveways are, relatively speaking, low traffic areas, it makes sense that a properly completed sealcoating job should last for roughly two to three years.

Does paving driveway increase home value?

Asphalt driveways can last you 20-25 years if properly installed and maintained – a great investment. … While they increase the value of your home, a nice paved driveway can also help sell your home FASTER.

What is the difference between asphalt and blacktop?

Asphalt generally refers to major highways and streets, whereas, blacktop is commonly used to refer to driveways and residential roads. As a matter of fact, blacktop is a type of asphalt.

How late can you pave a driveway?

Paving industry professionals agree that late spring and summer are the best seasons to lay asphalt and begin asphalt repairs.

How much does it cost to redo your driveway?

If you are replacing a driveway and building an exactly same new driveway on the same spot, you will pay anywhere from $100 to $150 per square meter. This is a rough estimate that you get when you add up the costs of concrete slab removal and the cost of pouring a concrete slab for a new driveway.

Do driveway sealers need two coats?

Most driveway sealer manufacturers recommend two coats with a minimum drying time of eight hours between coats, so this driveway sealing project will fill an entire weekend.

How do I blacktop my driveway?

How to Blacktop an Asphalt DrivewayClean your driveway with a high-powered hose. Ensure that all of the cracks are free of debris and plants. … Allow the asphalt dry thoroughly.Fill any cracks. … Fill any holes. … Allow the sealer to dry overnight.Clean the driveway. … Apply the sealer. … Block off the driveway, allowing it to dry for 24 hours.

How much should a driveway cost?

List of estimates for different types of drivewaysType of drivewayAverage reported cost per square metreConcrete driveway cost$65 – $90Asphalt driveway cost$25 – $40Bitumen driveway cost$25 – $40Paver driveway cost$40 – $100

When should I blacktop my driveway?

If the driveway has areas where the pavement is rutted or severely broken, where the pavement sort of looks like the hide of an alligator – we call this “alligatoring” or alligator cracks – this is when you need to start thinking about new asphalt.

Is it cheaper to blacktop or concrete driveway?

Ignoring any maintenance costs, asphalt is generally much cheaper to install than concrete. On average, the cost per square foot for asphalt will run between $2.50 to $4.00. … It’s not unheard of to have a stained concrete driveway with a smooth finish cost over $15.00 per square foot.

What is the cheapest type of driveway?

Gravel driveways are hands-down the most affordable option upfront. Asphalt driveways place second in cost, followed by cement and pavers. Although gravel driveways are the least expensive initially, they require the most maintenance long-term.

How much does Sealcoating a driveway cost?

For a basic 480 square foot driveway, you can expect to pay $80 to $115 for sealing. For a larger 1,000 square foot driveway, contractors typically charge between $170 and $240 for sealcoating. Prices depend on whether you get one or two coats and most will charge a minimum fee of $100 to $200 for the project.

Is sealing your driveway worth it?

Kindler said sealing helps prolong the life of a driveway and should be a regular part of home maintenance. “If you seal-coat a driveway or a highway, the surface will last longer,” said Kindler, who teaches a pavement class at Ohio State University. “I would recommend doing it about every three years on a driveway.”